i-1300 HT and LT Family of INERT Coatings

  • Highly inert to filamentous coke-make.
  • Substantial energy and emissions reductions.
  • Target high severity olefins production and refinery / upgrading operations.

i-1300 HT [Higher Severity]

  • Inert-1300 High Temperature coating.
  • World-first intrinsic inertness to filamentous coke-make.
  • Highest coating thermal stability achieved in sector to-date.

i-1300 LTpc [Medium Severity]

  • i-1300 Low Temperature Petrochemical coating.
  • Low-cost alumina-forming coating for olefins production.
  • Low oxide formation temperatures.
  • Converts Fe and Ni from base steel into highly thermally-stable inert phases.

i-1300 LTdc

  • i-1300 Low Temperature Delayed Coker coating.
  • Inert to surface based coke-make mechanisms.
  • Eliminates the formation of Fe-S-C coke layer.
  • Eliminates any filamentous coke-make.
  • Reduces feedstream “dropout” coke.
  • Piggable to a broad range of carbide appendages.

 

Engineered Properties

Surface and Coating Properties

  • Inert to surface filamentous coke make.
  • i-3000HT requires no surface oxide growth.
  • i-1300LTpc grows alumina surface at lower temperatures.
  • i-1300LTdc coating matrix is universally inert throughout entire coating matrix and piggable.

Degradation Resistance

  • Oxidation
  • Carburization
  • Sulfidation
  • Temperature Extremes/Upsets for (HT)
  • Piggable (i-1300 LTdc)

Key Mechanical Properties

  • CTE Matched
  • Ductile and Weldable

 

Multiple Industry Applications

How It Works

i-1300 HT

World-first INTRINSIC inertness (>95%) to filamentous coke-make in higher severity olefins production in the hottest part of the furnace coil without the need for the prior formation of a surface oxide barrier.

i-1300 LTpc

Low-cost inert alumina scale former for use in the cooler parts of olefins production furnace coils without any weldability challenges.

i-1300 LTdc

Low-temperature INTRINSIC inertness to all surface coke-make mechanisms and reduction in feedstream “dropout” coke collection for use in Delayed Coker furnace coils.  Intrinsic inertness requires no oxide growth and is piggable.

 

Targeted Field Performance

i-1300 HT & LTpc (Olefins Production)

  • 8-10% reduction in energy and GHG emissions
  • 1 year energy payback time
  • Up to 3-5X longer runtimes in ethane
  • Up to 2+X longer runtimes in naphtha
  • 17kT CO2e/yr reduction per installation

i-1300 LTdc (Delayed Coker / Refinery)

  • 4X decrease in pigging operations
  • 1.5X increase in coil lifetime
  • OPEX reduction via energy cost
  • 8kt CO2e/yr reduction per installation